UP-4Slim/MM-10 System (Top & Sub Kit)

The UP-4slim ultra-compact installation loudspeaker is ideally suited for applications requiring a small, slim, aesthetically pleasing cabinet that delivers high sound pressure levels with low distortion and uniform coverage. The UP-4slim offers this exceptional audio performance in a compact self-powered package with a remote power supply. As a standalone loudspeaker, the UP-4slim is appropriate for vocal reinforcement, front-fill, and under balcony fill applications.\n\nFeatures:\nExtraordinary fidelity and power in a compact aluminum package\nLow distortion drivers and a metal dome tweeter deliver a smooth high-frequency response\nWide, symmetrical coverage pattern creates a broad listening area\nUnique crossover design eliminates comb filtering and yields a consistent midrange response\nExceptional SPL-to-size ratio\nDesign supports long cable runs with light-gauge cables\nSpecifications:\nACOUSTICAL1\nOperating Frequency Range2: 65 Hz – 18 kHz\nFrequency Response3: 70 Hz – 18 kHz ±4 dB\nPhase Response: 102 Hz – 18 kHz ±45°\nLinear Peak SPL4: 116.5 dB with crest factor >16.5 dB (M-noise), 109.5 dB (Pink noise), 112.5 dB (B-noise)\nCOVERAGE\nHorizontal Coverage: 100°\nVertical Coverage: 100°\nTRANSDUCERS\nLow Frequency: Two 8-inch cone drivers; 4 Ω nominal impedance\nHigh Frequency: One 1-inch metal dome tweeter; 8 Ω nominal impedance\nAUDIO INPUT\nType: Differential, electronically balanced\nMaximum Common Mode Range: ±15 V DC\nConnectors: Phoenix 5-pin male\nInput Impedance: 10 kΩ differential between pins 2 and 3\nWiring:\nPin 1: DC Power (-)\nPin 2: DC Power (+)\nPin 3: Audio Shield, Chassis/earth through 220 kΩ, 1000 pF, 15 V clamp network to provide virtual ground lift at audio frequencies\nPin 4: Audio (-)\nPin 5: Audio (+)\nNominal Input Sensitivity: -2.0 dBV (0.8 V rms) continuous is typically the onset of limiting for noise and music\nInput Level: Audio source must be capable of producing of +16 dBV (6.31 V rms) into 600 Ω to produce the maximum peak SPL over the operating bandwidth of the loudspeaker.\nAMPLIFIER\nType: 3-channel, Class-D with integral advanced digital signal processing\nTotal Output Power5: 500 W peak\nTHD, IM, TIM: <0.02%\nCooling: Convection\nDC POWER\nConnector: Phoenix 5-pin male provides power and audio connection (see Wiring above)\nSafety Agency Rated Voltage Range: 48 V DC (Meyer Sound IntelligentDC External Power Supply Required)\nDC CURRENT DRAW\nIdle Current: 0.23 A average\nMaximum Long-Term Continuous Current (>10 sec): 1.00 A average\nMaximum Instantaneous Peak Current: 4.5 A peak\nPHYSICAL\nDimensions: W: 4.29 in (109 mm) x H: 15.90 in (404 mm) x D: 5.69 in (144 mm)\nWeight: 14 lb (6.35 kg)\nEnclosure: Aluminum with slightly textured black finish\nProtective Grille: Powder-coated, stamped steel with black mesh\nRigging: Top and bottom aluminum plates with M8 threads