Aviom A-16II Personal Mixer Monitoring Station

The Aviom A-16II is just one of many personal monitor mixers in our rental inventory.\n\nDesigned for use in live performance or in the studio, the Aviom A-16II Personal Mixer gives each performer control over channel volume, grouping, pan, stereo spread, as well as master volume and tone. Every Personal Mixer in a system can create a unique monitor mix for a performer. Users can save and recall up to sixteen custom mixes as presets in their Personal Mixer.\n\nStereo Output for Wired or Wireless IEMs\nThe TRS stereo output from the A-16II can be used to drive wired or wireless in-ear monitors (IEMs), headphones, powered floor wedges, an amplifier, or spot monitors.\n\nThe A-16II Personal Mixer is fully compatible with all Pro16 Series products, including Aviom’s Y1 A-Net card for Yamaha digital mixing consoles. Support for the industry standard Aviom monitor mixing is available in the form of console interface cards from an ever- increasing list of digital console manufacturers (including Avid(Digidesign), DiGiCo, Soundcraft, Innovason, Tascam). Many other digital console manufacturers offer a Pro16 A-Net output option.\n\nPower Over Cat-5\nPersonal Mixers can be daisy chained or connected in parallel using an A-Net Distributor. Parallel connections also allow DC power to be supplied to the mixers over the Cat-5e cable. The A-16II supports Cat-5e cable runs of up to 500 feet (150 meters) between devices, and there is no practiacal limit to the number of personal mixers in a system.\n\nCompatibility\nAll Pro16 Personal Mixers, including the A-16II, A-16R, and A360, can be used in any combination when creating a personal mixing system.\n\nAdding an ASI A-Net Systems Interface to a Pro64 network allows a Personal Mixer to output any 16 channels from a Pro64 digital snake or audio network.\n\nAudio Output- 1/4-inch TRS stereo, headphone or line level\nLine/Headphone TRS Output- Tip: Audio Left; Ring: Audio Right; Sleeve: Ground\nAuto-detects mono plugs\nA-Net Input/Output- 1 A-Net input, 1 A-Net output; Category 5 (RJ45 connector)\nDigital to Analog Conversion Bit Depth- 24 bit\nSignal to Noise Ratio- (Referenced to 0dB) -103dB\nLatency- <0.880 msec (measured from analog input to analog output)\nPro16 A-Net- Uses unshielded Cat-5e UTP (or better) cable; maximum 500ft (150m) between devices\nTreble +/-12dB at 9kHz shelving\nBass- +/-12dB at 160Hz shelving\nMaximum Levels (RMS)- Line/Headphone outs: 1.0 watt at 100 ohms\nImpedance- Line/Headphone outs: 32 ohms\nDimensions- 10.75″ (273 mm) wide x 5.6″ (142.2 mm) deep; 2.25″ (57.5 mm) high\nWeight- 3.4 lb (1.54 kg)